Call us at 845-778-2196
Call us at 845-778-2196
Prime archery
A System Built For Accuracy
Prime has always been a brand focused on making the hunter, a better and more consistent shot. The Parallel Cam System to prevent that cam lean, the Centergy technology to create an easy bow to hold on target, to the 82x material to create less riser movement makes the Logic series the most accurate bows on the market.
Prime archery
LOGIC CT3
LOGIC CT3
LOGIC CT3
- 33″ Axle to Axle
- 335 fps.
- 6.5″ Brace Height
- 24.5″ – 30″ Draw Lengths
- 4.4 lbs. (out of the box)
- 40, 50, 60, 65, 70, 80 lbs Draw Weights
LOGIC CT5
LOGIC CT3
LOGIC CT3
- 35″ Axle to Axle
- 340 fps.
- 6″ Brace Height
- 24.5″ – 30″ Draw Lengths
- 4.5 lbs. (out of the box)
- 40, 50, 60, 65, 70, 80 lbs Draw Weights
LOGIC CT9
LOGIC CT9
LOGIC CT9
- 39″ Axle to Axle
- 325 fps.
- 7″ Brace Height
- 26.5″ – 32″ Draw Lengths
- 4.7 lbs. (out of the box)
- 40, 50, 60, 65, 70, 80 lbs Draw Weights
LOGIC
LOGIC CT9
LOGIC CT9
- 31″ Axle to Axle
- 330 fps.
- 7″ Brace Height
- 24.5″ – 30″ Draw Lengths
- 4.3 lbs. (out of the box)
- 40, 50, 60, 65, 70, 80 lbs Draw Weights
TECHNOLOGY
PARALLEL CAM SYSTEM
PARALLEL CAM SYSTEM
PARALLEL CAM SYSTEM
The Patented Parallel Cam System practically eliminates cam lean. With no cam lean the string will travel straighter through the shot cycle, making it easier to tune and more consistent on each shot.
CENTERGY TECHNOLOGY
PARALLEL CAM SYSTEM
PARALLEL CAM SYSTEM
Centergy Technology is a Center Grip riser design that dramatically increases balance while aiming. This design will reduce the amount of pin float while you aim… Get locked on and stay locked on!
FLEXIS AR
PARALLEL CAM SYSTEM
82X ALUMINUM
The patented Flexis AR is an adjustable roller guard the flexes out of the way of the arrow during the shot cycle, reducing torque on the riser caused by the cable tension. This can be adjusted to fit any arrow or fletching size.
82X ALUMINUM
COMPRESSION AXLE
82X ALUMINUM
82X Aluminum is a proprietary blend of aluminum that offers a specific stiffness. A stronger and lighter aluminum that alows us to reduce bow torque and keep the system lightweight.
COMPRESSION AXLE
COMPRESSION AXLE
COMPRESSION AXLE
This axle compresses the bearing so that there is no slop between the bearing of the cam and spacer that contacts the limb. This also allows for full use of the bearing with no slipping.
SWERVE
COMPRESSION AXLE
COMPRESSION AXLE
The Swerve is a curve in the base of the riser designed to reduce and control the flex in the riser. By controlling the flex of the riser we can make the small amount of flex there is, flex in sync with the top half of the bow, greatly reducing knock travel.